#1단계의 변경 사항
편집자 Clay Eickemeyer-
편집 승인됨 완료자 Clay Eickemeyer
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully peel |
|---|---|
| + | [* black] Carefully peel the rubber fan bumper from the edge of the heat sink to expose the iSight camera cable adhered to the fan. |
| [* icon_reminder] The fan bumper wraps around the heat sink and fits into the fan duct slots. During reassembly, be sure to fit the tabs into the notches in the fan duct. | |
| - | [* icon_note] It is not necessary to completely remove the rubber fan bumper. |