주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the two 7.2 mm T10 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 Torx screws.
- [* icon_note] When reassembling - make sure you have positioned the power button wire so it is not trapped below the board.
+ [* icon_reminder] During reassembly, be careful not to trap the power button wire behind the board.