주요 콘텐츠로 건너뛰기

#19 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] To remove the upper component board you will be pulling gently on its cable while lifting it up enough to clear the battery, but not high enough to scrape against the rear case. Go slowly and carefully.
[* black] Insert the tip of a spudger under the upper component control board to lift it slightly.
[* black] Insert the tip of a spudger under the upper component control board to lift it slightly.
[* black] Pull the board up and out of the space between the battery and the rear case bezel.
[* black] Remove the upper component control board.
[* icon_reminder] On reassembly, you'll want to reconnect the GPS antenna cable at this point. Use tweezers and work carefully.
[* black] Remove the upper component control board.
[* icon_reminder] On reassembly, you'll want to reconnect the GPS antenna cable at this point. Use tweezers and work carefully.