주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Richdave- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] The LCD sensor is located on the rear of the display panel in the top Right corner. It is under the black foil about 40mm from the top edge.
[* black] Carefully cut the foil and peel it back to expose the sensor. It will have a foam pad stuck over it.
[* black] Gently peel the foam off the sensor to reveal the PCB assembly.
[* black] The Sensor is held in place with a small adhesive pad so to remove it, gently pry it up from one edge with a plastic spudger or similar. I recommend NOT using metal tools here.