주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Angelo- 에 의해 수정

편집 승인됨 완료자 Angelo

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the five identical 3.5 mm screws from the bottom of the cameracamera.
[* black] Remove the grey plastic piece thatpiece, which was held in place with the five screwsscrews, by gently prying the faceplate up (Note: dofront cover up. Do not pull hard, there areapply too much force because two wires connectingstill connect the faceplatefront cover to the logic board)board.
[* red] Remove the five identical 3.5 mm screws from the bottom of the cameracamera.
[* black] Remove the grey plastic piece thatpiece, which was held in place with the five screwsscrews, by gently prying the faceplate up (Note: dofront cover up. Do not pull hard, there areapply too much force because two wires connectingstill connect the faceplatefront cover to the logic board)board.