주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Angelo- 에 의해 수정

편집 승인됨 완료자 Angelo

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the five identical 3.5 mm screws fromthat are at the bottom of the camera.
[* black] Remove the grey plastic piece, which was held in place with the five screws, by gently prying the front cover upcover. Do not apply too much force because two wires still connect the front cover to the logic board.
[* red] Remove the five identical 3.5 mm screws fromthat are at the bottom of the camera.
[* black] Remove the grey plastic piece, which was held in place with the five screws, by gently prying the front cover upcover. Do not apply too much force because two wires still connect the front cover to the logic board.