주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Kristen Gismondi- 에 의해 수정

편집 승인됨 완료자 Kristen Gismondi

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Remove the 3.5 mm screw from the logic board next to the rotating lens
-[* black] Invert the logic board and lens toward the orange and blue wires still connecting the logic board to the LED screen
+[* red] Remove the 3.5 mm screw from the motherboard next to the rotating lens.
+[* black] Invert the motherboard and lens toward the orange and blue wires still connecting the motherboard to the LED screen.