주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Mary Walters- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm PhillipsPhillips.Long on the outside.
[* orange] One 4 mm Phillips on the right side. Short in the middle.
[* red] Two 3 mm PhillipsPhillips.Long on the outside.
[* orange] One 4 mm Phillips on the right side. Short in the middle.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.