메뉴

설정

#2단계의 변경 사항

filchambers- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.