#2 단계의 변경 사항

Brian Boudreau- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldberg

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] WhenI found that the image is incorrect on this step. The3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.
[* icon_reminder] WhenI found that the image is incorrect on this step. The3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.