메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Brian Boudreau- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] WhenI found that the image is incorrect on this step. The 3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.
[* icon_reminder] WhenI found that the image is incorrect on this step. The 3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.