주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] I found that the image is incorrect on this step. The 3 mm screw is in the center. WhenWhen reinstalling these screws, it may be helpful to push downpress gently on the lower case to line up the screw holes.
[* icon_reminder] I found that the image is incorrect on this step. The 3 mm screw is in the center. WhenWhen reinstalling these screws, it may be helpful to push downpress gently on the lower case to line up the screw holes.