메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Suri- 에 의해 수정

편집 거부됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00. (In some cases two 4mm)
[* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above)
[* red] Two 3 mm Phillips #00. (In some cases two 4mm)
[* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above)
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.