물건을 수리하세요 커뮤니티 상점

#15단계의 변경 사항

편집자 Philip Le Riche-

편집 승인됨 완료자 Philip Le Riche

이전
이후
변경 사항 없음

단계 라인

-[* black] Lens disassembly and reassembly is not for the faint-hearted. However, you can test the operation of the lens mechanism as follows. (Do this after reassembly if you strip it down.)
+[* black] Test the operation of the lens mechanism as follows.
[* black] Gently lift the ribbon cable connections off the two tags on the back of the motor.
[* black] Apply power to the motor from a 3v battery pack by connecting it to the two tags on the motor. Apply positive to the terminal to the front of the lens to extend it, or to the back of the lens to retract. (Keep all ribbons out of the way - applying power inadvertently to the wrong place could damage something.)
+[* black] Disassembly of the lens is covered in the companion guide "Canon PowerShot SX200 IS Lens Disassembly". This should allow most cases of stuck lenses and the dreaded "Lens Error" to be diagnosed, and hopefully fixed.