주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Eric Essen- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Remove the single black Torx screw that fastens the display cable to the plastic casing.
+[* red] Remove the single black Torx screw that fastens the display cable to the plastic casing.
[* black] Grasp the thin display inverter board at its left end; lift up and rotate toward yourself.
[* icon_note] There are two tabs that hold the display inverter in place; these are what you need to get past in order to pull the board free.