주요 콘텐츠로 건너뛰기

#4 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereRemove the following four screws securing the hard drive and IR sensor cable to the upper case:
[* red] Two 1.5 mm Phillips screws.
[* orange] Two 4 mm Phillips screws.
[* black] Slide the hard drive and IR sensor bracket away from the edge of the upper case.
[* black] Carefully peel the hard drive and IR sensor cable from the upper case.
[* black] Remove the hard drive/IR sensor cable from the upper case and set it aside
.
[* black] Insert wisdom hereRemove the following four screws securing the hard drive and IR sensor cable to the upper case:
[* red] Two 1.5 mm Phillips screws.
[* orange] Two 4 mm Phillips screws.
[* black] Slide the hard drive and IR sensor bracket away from the edge of the upper case.
[* black] Carefully peel the hard drive and IR sensor cable from the upper case.
[* black] Remove the hard drive/IR sensor cable from the upper case and set it aside
.