주요 콘텐츠로 건너뛰기

#5 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] disconnecting airport cablesUse the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* black] disconnecting airport cablesUse the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.