주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Removing airport screws, lifting airportLift the AirPort board/cable retainer assembly out of the upper case.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Removing airport screws, lifting airportLift the AirPort board/cable retainer assembly out of the upper case.