주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 에 의해 Sam Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
[* blackicon_caution] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
[* blackicon_caution] Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
[* black] Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.
[* icon_note] There are several clips attachingholding the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.
[* icon_note] There are several clips attachingholding the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.