주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] PullOpen the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
[* icon_note] Several clips along the top edge of the front panel form a partial hinge.
[* icon_reminder] During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
[* black] PullOpen the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
[* icon_note] Several clips along the top edge of the front panel form a partial hinge.
[* icon_reminder] During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지가 없습니다

추가