주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

FixWiki- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
-[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
+[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)