Skip to main content

#9 단계의 변경 사항

wattage- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Lift the front panel out of the inner case, minding the cable still routed through the bottom of the Evo.
[* black] Carefully de-route the front panel ribbon cable through the slot in the inner case.
[* black] Remove the front panel.
[* black] Notice the four (4) clear plastic hooks that are adhered behind the menu buttons. Look closely. Each one is shaped differently and in a particular orientation.
[* black] If the replacement front panel does not have these installed already, carefully remove and transfer them from the old panel to the replacement.