주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.4 mm standoff screws
[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to remove these standoff screwsensure it doesn't slip and damage surrounding components.
[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to remove these standoff screwsensure it doesn't slip and damage surrounding components.
[* orange] One 2.1 mm Phillips #00 screw