주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Chavdar Sirakov- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_reminder] Before disassembling your iPhone, be sure it is powered off.
[* red] Remove the two 3.6 mm Phillips screws next to the dock connector.
[* icon_note] Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
[* red] Remove the two 3.6 mm Pentalobe screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our [product|IF182-019|Liberation Kit] provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.
+[* black] Before you start, you can make your life easier by using the user-contributed printout template called "iphone4-screw-template.pdf". It's attached to this tutorial and it will allow you to sort the different screws as you remove them, helping the reassembly process greatly.