주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Miroslav Djuric- 에 의해 수정

편집 승인됨 완료자 Miroslav Djuric

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_note] Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
-[* red] Remove the two 3.6 mm Pentalobe screws next to the dock connector.
+[* icon_note] Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws. Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.
+[* red] Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our [product|IF182-019|Liberation Kit] provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
-[* icon_caution] The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.