주요 콘텐츠로 건너뛰기

#3 단계의 변경 사항

Jake Devincenzi- 에 의해 수정

편집 승인됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the clear plastic pull tab to gently lift the battery out of the iPhone.
[* icon_caution] Do not remove the plastic tab from the iPhone.
[* icon_note] You may need to use a plastic opening tool to loosen the adhesive under the battery.
[* red] Remove the contact clip from the iPhone.
[* black] Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
[* icon_note] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.

이미지 3

이전 이미지가 없습니다

추가