Skip to main content

#2 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Remove the following two screws:
[* red] One 1.2 mm Phillips
[* orange] One 1.6 mm Phillips
[* black] Remove the thin steel dock connector cable cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.