주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Dennis Jengo- 에 의해 수정

편집 거부됨 완료자 David Hodson

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following two screws:
[* red] One 1.2 mm PhillipsPhillips''' screw #4'''
[* orange] One 1.6 mm PhillipsPhillips''' screw #5'''
[* red] One 1.2 mm PhillipsPhillips''' screw #4'''
[* orange] One 1.6 mm PhillipsPhillips''' screw #5'''
[* black] Remove the thin steel dock connector cable cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.