주요 콘텐츠로 건너뛰기

#8단계의 변경 사항

Brian Rose- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use an iPod opening tool to slightly lift the top edge of the connector cover away from the logic board.
[* black] Use the tip of a spudger to pull the connector cover retaining clips away from the inner frame.
[* black] Remove the connector cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the connector cover with a de-greaser such as Windex. The oils on your fingers have the potential to cause wireless interference issues. ***Do not*** clean the connectors themselves with Windex.
+[* red] Be careful not to detach a small metal grounding clip.
+[* orange] Be careful not to dislodge this small metal nut.

이미지 1

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전