메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

robin- 에 의해 수정

편집 거부됨 에 의해 Evan Noronha

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] De-route the home button ribbon cable through the inner case and remove the home button from the iPhone.
[* icon_note] When installing a new part, there may be a protective plastic film on the home button. It can be removed with a spudger or your fingernail.
[* icon_note] When re-installing, the tab on the ribbon cable will not align with the slot. Ignore the correct seating of the button until after the tab is in the connector and locked down.