주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#2단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Gently pull the battery adhesive tab away from the battery, toward the bottom of the iPhone.
[* black] Try not to pull against the battery or the lower components, or you may rip the adhesive strip.
[* black] Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.
[* icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If either of the adhesive strips breaks off underneath the battery and cannot be retrieved, try to remove the remaining strip, and then proceed to '''Step 25'''.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가