#1단계의 변경 사항
Jackson- 에 의해 수정
편집 거부됨 완료자 Miroslav Djuric
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Remove the following two screws securing the vibrator to the inner frame: |
[* red] One 6 mm Phillips |
[* orange] One 1.4 mm Phillips |
[* black] Remove the vibrator from the iPhone. |
[* black] Make sure when reinstalling that the weight at the end of the motor has enough room to spin, otherwise the phone will not be able to vibrate. |