주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#8단계의 변경 사항

hpootel- 에 의해 수정

편집 승인됨 완료자 Jake Devincenzi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
[* black] It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.
[* icon_caution] Be careful, if the home button sticks to the front panel you may tear the home button cable.
[* icon_caution] Do not flip the front glass completely away from the frame. Doing so may result In damage to the digitizer cable.
[* black] The glass front provides stiffness to the front panel, so if the glass is cracked (which is likely given that you are replacing it) removing the panel is likely to splinter off small shards of glass. Perform this step over a trash can and use protective eyewear.