#8단계의 변경 사항
hpootel- 에 의해 수정
편집 승인됨 완료자 Andrew Optimus Goldheart
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame. |
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area. |
[* black] It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go. |
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame. |
[* icon_caution] Be careful, if the home button sticks to the front panel you may tear the home button cable. |
[* icon_caution] Do not flip the front glass completely away from the frame. Doing so may result In damage to the digitizer cable. |
[* icon_caution] |
[* icon_caution] |