주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#9단계의 변경 사항

Chris Burkhardt- 에 의해 수정

편집 거부됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* black] De-route the digitizer and LCD cables through the steel inner frame, and remove the display from the iPhone.
[* icon_reminder] When reinstalling the display, carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the steel frame. [https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo|new_window=true] shows the display assembly being installed '''incorrectly''', with a fold in the digitizer cable.
[* black] When the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to one another and should be the same length, as shown in the second photo.
[* icon_caution] If the digitizer cable has not been installed incorrectly, it will not reach its socket on the logic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through to its full length, as shown.
[* icon_caution] If the digitizer cable has not been installed incorrectly, it will not reach its socket on the logic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through to its full length, as shown.
[* red] During reassembly, do not touch the metallic area at the base of the LCD data cable, as this can cause problems with the LCD. If you do touch it accidentally, clean it gently with an alcohol wipe before continuing.