주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] The chips in the steps below are not part of the iPhone 4, but are included to illustrate the incredible structures of MEMS gyroscopes.
[* black] Shown in these photos is the ST LYPR540AH Tri-axis MEMS gyroscope, shot by a scanning electron microscope ([link|http://en.wikipedia.org/wiki/Scanning_electron_microscope|SEM]).
[* black] MEMS devices require extremely complicated and sensitive [link|http://en.wikipedia.org/wiki/Microelectromechanical_systems#MEMS_manufacturing_technologies|manufacturing procedures] to produce the kind of accuracy needed for reliable sensors.
-[* black] Most MEMS devices require a combination of deposition of a film layer, patterning to mask off areas of the deposited film to remain after etching, and etching to remove excess metallic film to achieve the final product.
+[* black] Most MEMS devices require a combination of deposition of a film layer, patterning to mask off areas of the deposited film to remain after etching, and etching to remove excess film to achieve the final product.