주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] As the plates move, they produce a change in capacitance on the sensing capacitive plates.
-[* black] Feedback from capacitors attached to the oscillating plates within the gyroscope is fed to an [link|http://en.wikipedia.org/wiki/Application-specific_integrated_circuit|ASIC] that multiplies raw data by the sensitivty, or gain, of the unit, which is the ratio of output to input of the sensor.
-[* black] The sensitivity of MEMS devices is usually in mV/dps (or degrees per second), so the output of the oscillator (in mV) divided by the sensitivity (mV/dps) provides the angular rate applied to the package in degrees per second.
+[* black] Feedback from the sensing capacitive plates attached to the oscillating plates within the gyroscope is fed to an [link|http://en.wikipedia.org/wiki/Application-specific_integrated_circuit|ASIC] that multiplies the raw feedback signal by the sensitivty, or gain, of the unit, which is the ratio of output to input of the sensor.
+[* black] The sensitivity of MEMS gyroscopes is usually in mV/dps (or degrees per second), so the output of the oscillator (in mV) divided by the sensitivity (mV/dps) provides the angular rate applied to the package, in degrees per second.
[* black] This data is used, for example, to turn the steering wheel of a car or to change the course of an aircraft in any of the iPhone 4's games.