주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
[*
black] Insert a metal spudger in the front left slit of the top panel, and underneath the bottom inside edge of the clip, as described above.
[* black] While simultaneously rotatingSimultaneously rotate the spudger away from the console to free the clip,clip and pull up on the top panel up from the rest of the consolepanel.
[* black] The top panelYou will not come free from the console yet, however the two end clips will makehear a "pop" sound as they are disengagedsignifying that the clip cleared it's catch.
[* black] Orient the console so that the left panel is facing toward you and the front panel is facing toward the right.
[*
black] Insert a metal spudger in the front left slit of the top panel, and underneath the bottom inside edge of the clip, as described above.
[* black] While simultaneously rotatingSimultaneously rotate the spudger away from the console to free the clip,clip and pull up on the top panel up from the rest of the consolepanel.
[* black] The top panelYou will not come free from the console yet, however the two end clips will makehear a "pop" sound as they are disengagedsignifying that the clip cleared it's catch.