주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Tkappock- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* blue] In order to gain access to the hard drive, you will need to remove the 8 Phillips PH00 screws that attach the metal bottom of the case to the top plastic part.
-[* icon_note] Some revisions of the Time Capsule may have 10 screws. The revision with the 10 screws can be identified by checking if the Time Capsule has two screws each in the upper left and bottom right when the unit held in the orientation as shown in the image. In this situation, make sure to remove all 10 screws.
+[* icon_note] Some revisions of the Time Capsule have 10 screws. Shown is an A1254 revision which has two screws in the upper right and lower left corners as shown in the image. In this situation make sure to remove all 10 screws.

이미지 2

이전 이미지 없음

추가