주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Adriana Rahrig- 에 의해 수정

편집 승인됨 완료자 Geoff Wacker

이전
이후
변경 사항이 없습니다

단계 라인

-[* blue] Once the rubber base is safely separated, remove the 8 Phillips PH00 screws that attach the metal bottom of the case to the top plastic part.
-[* icon_note] Some revisions of the Time Capsule have 10 screws. The A1254 revision has two screws in the upper right and lower left corners, as shown in the second image. In this situation, make sure to remove all 10 screws.
+[title] Remove the screws
+[* blue] Once the rubber base is separated from the device, remove the 8 Phillips PH00 screws that attach the metal bottom of the case to the plastic top of the case.
+ [* icon_reminder] Use the Philiips #00 Screwdriver.
+[* icon_note] Some revisions of the Time Capsule have 10 screws. The A1254 revision has two screws in the upper right and lower left corners, as shown in the second image. In this situation, be sure to remove all 10 screws.