주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use a soldering iron to de-solder both vibration motor wires from the controllerlogic board.
[* black] Use a soldering iron to de-solder both vibration motor wires from the controllerlogic board.
[* icon_caution] Not too much experience with soldering? Check out our [guide|750|soldering guide] for detailed instructions.
[* icon_note] The positive (red) wire connects nearest the top of the controllerlogic board.
[* icon_note] The positive (red) wire connects nearest the top of the controllerlogic board.
[* icon_caution] When soldering on circuit boards, be sure not to overheat the connection as permanent damage may result.