메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Brett Hartt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert the edge of a spudger in between the trigger and the trigger assembly near the left edge. Pry the housing away from the catch on the trigger.
[* black] In a similar mannerUsing the previously described technique, pry the trigger housing on the right side of the triggeredge away from the catch on that sidetrigger.
[* black] In a similar mannerUsing the previously described technique, pry the trigger housing on the right side of the triggeredge away from the catch on that sidetrigger.
[* black] Rotate the trigger away from the logic board, past its housing.