주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

mayer- 에 의해 수정

편집 승인됨 에 의해 mayer

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the ten silver T6 Torx screws securing the display (five on each side). On the right a 9.6 mm screw secures the display data cable, also on the left the screw closest to the inside is 9.6 mm. The others are 7.8 mm.
[* red] Remove the ten silver T6 Torx screws securing the display (five on each side). On the right a 9.6 mm screw secures the display data cable, also on the left the screw closest to the inside is 9.6 mm. The others are 7.8 mm.
[* icon_reminder] Don't forget to replace the hinge end caps when reinstalling the display assembly. The end caps are side specific, so be sure that the posts are facing towards the lower case.