주요 콘텐츠로 건너뛰기

#29단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_note] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
+[* icon_note] Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
[* icon_caution] Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.
[* icon_caution] Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.
- [* icon_note] There are two long thin strips of adhesive (one on either side) that run along the edges of the display.
- [* icon_reminder] To reduce chances of cracking the LCD the two most used methods without prying up are:
- [* black] Running a thin fishing line under the display starting from the top then working your way down
- [* black] Using a thin plastic card or a plastic money note to cut through the adhesive starting from the top.
+ [* icon_note] You can try these alternate removal methods to reduce your chance of cracking the LCD during the removal process:
+ [* black] Run a thin string (like floss or fishing line) under the display, starting from the top then working your way down
+ [* black] Use a thin, flexible card or plastic money note to cut through the adhesive starting from the top.