주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#11단계의 변경 사항

LeonSteyns- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use your fingernail to flip up the retaining flap on the keyboard ribbon cable socket.
[* icon_caution] Be sure you are prying up on the retaining flap, '''not''' the socket itself.
[* black] Pull the keyboard ribbon cable out of its socket.
[* black] '''Tip for re-seating the keyboard cable:''' put a piece of sticky tape on, fold over at the top end, re-seat the connector (carefully!) with a spudger and (gently!) pull the tape 'over' the connector on the logic board until you feel it nudges in fully. Notice the emphasis on "carefully" and "gently"... :)