주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#17단계의 변경 사항

LeonSteyns- 에 의해 수정

편집 거부됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_caution] Handle the logic board by its edges only.
[* black] Lift the logic board from the side nearest the optical drive and lift it away from the upper case.
[* black] Carefully pull the ports and DC-In board away from the side of the upper case and remove the logic board, minding any cables that may get caught.
[* black] Beware of the MagSafe-connector that is still in place '''on the other side''' of the logic board! If you gently flip over the logic board (as if it where to 'hinge' over the point where it's still connected), you can put it aside upside-down and remove the connector with a spudger.

이미지 3

이전 이미지 없음

추가