#8단계의 변경 사항
단계 라인
| + | [* black] Cut the adhesive between LCD screen and mid plate carefully. Especially care about the position of the flex very much. |
|---|---|
| + | [* black] The adhesive is in the red scale, it's strong and we had damaged the foil film on the back of the screen when cut the adhesive. Heat with a low degree will make easier. |
| + | [* black] Release the connectors from motherboard. The right one is S Pen sensor film connector and the right one is LCD screen connector. |
| + | [* black] You also can see the soft keys on the bottom side. So be careful when cut the adhesive, don't hurt that part. |
| + | [* black] At last, remove LCD screen assembly carefully. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가