#7단계의 변경 사항
편집자 Geoff Wacker-
편집 승인됨 완료자 Geoff Wacker
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable. | |
| - | [* icon_caution] Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful |
| + | [* icon_caution] Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable. |
| [* icon_reminder] During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button. |