주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#31단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gentlyicon_note] The Lightning connector cable is stuck to see ifthe case with some adhesive. To detach the adhesive is softened. If not, reheatyou will be sliding an opening pick between the iOpenercable and reapply it to the back of the rear case. Be very careful not to cut the Lightning connector cable itself.
[* black] Carefully insert a guitar pick under the Lightningribbon cable near the Lighting connector ribbon cablehousing.
[* black] Slide the guitar pick toward the logic board, but stop half an inch from the bend in the cable.cable.
[* black] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gentlyicon_note] The Lightning connector cable is stuck to see ifthe case with some adhesive. To detach the adhesive is softened. If not, reheatyou will be sliding an opening pick between the iOpenercable and reapply it to the back of the rear case. Be very careful not to cut the Lightning connector cable itself.
[* black] Carefully insert a guitar pick under the Lightningribbon cable near the Lighting connector ribbon cablehousing.
[* black] Slide the guitar pick toward the logic board, but stop half an inch from the bend in the cable.cable.
[* black] Continuing farther along the ribbon cable risks cutting it.