주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

axel- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[title] Assemble new screen
[* black] Before going any further, test your new screen by plugging it to the device's main flex and powering it on. If all is well, power off. If not, contact your screen reseller.
[* black] Carefully remove the earpiece from screen, by pulling on it gentlygently and separating the adhesive. Notice the position of the earpiece on the back of the screen, as you will need to put it back in the same position on the new screen.
[* black] Ideally, remove the earpiece with its adhesive, as you will need to put the earpiece back on the new screen when you reassemble the device. Earpiece adhesive keeps the earpiece properly in place on the screen.
[* black] Make '''sure the earpiece is in the right position and connects properly with the main flex''' before you reassemblereassemble for good. Otherwise you will not get sound from the earpiece, and won't be able to make calls normally.
[* black] Carefully remove the earpiece from screen, by pulling on it gentlygently and separating the adhesive. Notice the position of the earpiece on the back of the screen, as you will need to put it back in the same position on the new screen.
[* black] Ideally, remove the earpiece with its adhesive, as you will need to put the earpiece back on the new screen when you reassemble the device. Earpiece adhesive keeps the earpiece properly in place on the screen.
[* black] Make '''sure the earpiece is in the right position and connects properly with the main flex''' before you reassemblereassemble for good. Otherwise you will not get sound from the earpiece, and won't be able to make calls normally.
[* black] Ensure the midframe is clean: any glue residue will limit the new adhesive's capacity to properly stick to the midframe.
[* black] Carefully apply the front screen adhesive, starting at one end of the phone (top or bottom) and slowly applying it along the midframe edges, on the sides.
[* black] Finally, put the new screen in place, pressing it firmly into place.
[* black] Be careful: '''don't press too hard on the earpiece area''' at the top, as the screen is '''particularly fragile''' around the earpiece.